Benutzer:Zim: Unterschied zwischen den Versionen
Aus Opennet
Zim (Diskussion | Beiträge) |
Zim (Diskussion | Beiträge) (update) |
||
Zeile 18: | Zeile 18: | ||
07.02.2008: | 07.02.2008: | ||
kamikaze 7.09 | kamikaze 7.09 | ||
− | olsr: /etc/init.d/olsrd | + | - olsr: /etc/init.d/olsrd |
− | - USE_CONF_F=/etc/olsrd.conf | + | - USE_CONF_F=/etc/olsrd.conf |
+ | |||
+ | mrd6: | ||
+ | - debian-config funktioniert, default-log aendern... | ||
+ | |||
+ | ahcp: | ||
+ | - funktioniert | ||
+ | - config folgt | ||
+ | |||
+ | babel: | ||
+ | - kein broadcast des default-gw | ||
+ | |||
+ | ipv6-debian-mirror: | ||
+ | - deb ftp://ftp.ipv6.debian.org/debian | ||
+ | |||
+ | flashen: | ||
+ | - fonera: | ||
+ | - mtd -e vmlinux.bin.l7 write openwrt-atheros-vmlinux.lzma vmlinux.bin.l7 | ||
+ | - mtd -e rootfs write openwrt-atheros-root.squashfs rootfs | ||
+ | - wrt54g per tftp | ||
+ | - atftp --trace --option "timeout 1" --option "mode octet" --put --local-file bin/openwrt-brcm-.bin 192.168.1.1 | ||
+ | - wrt54g per console | ||
+ | - mtd -r -e linux openwrt-brcm-.bin linux |
Version vom 13. Februar 2008, 03:21 Uhr
Informatikstudent
Schwerpunkt:
- Routing/Switching (CCNA) - IPv6
OpenWRT:
- Kamikaze fuer Linksys WRT54GL - AP, IPv6, aiccu, radvd - Kamikaze-nano fuer Linksys WRT54GS-V5 (2MB Flash) - grundlegende AP-Funktion, keine WebIF, (noch) kein OLSRd, kein OpenVPN
Da es schon genug Leute im Verein gibt, die sich um Kamikaze-Port kuemmern, werd ich davon meine Finger lassen.
- Es gibt aus meiner Sicht gewiss nicht genug Leute, eher zu wenige. --Mathias 13:01, 13. Jun 2007 (CEST)
07.02.2008:
kamikaze 7.09
- olsr: /etc/init.d/olsrd - USE_CONF_F=/etc/olsrd.conf
mrd6:
- debian-config funktioniert, default-log aendern...
ahcp:
- funktioniert - config folgt
babel:
- kein broadcast des default-gw
ipv6-debian-mirror:
- deb ftp://ftp.ipv6.debian.org/debian
flashen:
- fonera: - mtd -e vmlinux.bin.l7 write openwrt-atheros-vmlinux.lzma vmlinux.bin.l7 - mtd -e rootfs write openwrt-atheros-root.squashfs rootfs - wrt54g per tftp - atftp --trace --option "timeout 1" --option "mode octet" --put --local-file bin/openwrt-brcm-.bin 192.168.1.1 - wrt54g per console - mtd -r -e linux openwrt-brcm-.bin linux